|
|
|
|
SITRANS LVL100
|
|
Mã sản phẩm:
7ML5745
Tên sản phẩm:
SITRANS LVL100
SITRANS LVL100 is a compact vibrating level switch for use in liquid applications such as overflow, high, low and demand applications, as well as pump protection. It is ideal for use in confined spaces.
SITRANS LVL100 is a compact level switch designed for industrial use in all areas of process technology and can be used with liquids and slurries. With an insertion length of only 40 mm (1.57“), SITRANS LVL100 can be mounted in small pipes and confined space applications. It is also virtually unaffected by the chemical and physical properties of the liquid. The LVL100 can also be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or strong external vibration.
The tuning fork is piezoelectrically energized and vibrates at its mechanical resonance frequency of approximately 1200 Hz. The vibration frequency changes when the tuning fork is covered by the medium. This change is detected by the integrated oscillator and converted into a switching command. The integrated electronics evaluate the level signal and output a switching signal, directly operating connected devices.
Key Applications: For use in liquids and slurries, for level measurement, overfill, and dry run protection.
Benefits- Proven vibrating level switch technology for liquids
- Compact insertion length of 40 mm (1.57”) for confined space applications
- Fault monitoring for corrosion, loss of vibration, or line break to the piezo drive
Detail| Range | 40 mm (1.5”) insertion | | Process Temperature | -40 to 150 °C (-40 to 302 °F) | | Process Pressure | -1 to 64 bar g (-14.5 to 928 psi g) |
|
|
|
|
|
|
SITRANS LVL200
|
|
Mã sản phẩm:
7ML5746/7ML5747
Tên sản phẩm:
SITRANS LVL200
Description
SITRANS LVL200 is a standard vibrating level switch for use in all liquid and slurry applications such as overflow, high, low, and demand applications, as well as pump protection. For use in SIL-2 applications.
SITRANS LVL200 is a level switch designed for industrial use in all areas of process technology and can be used with liquids and slurries. With a tuning fork insertion length of only 40 mm (1.57“), SITRANS LVL200 can be mounted in small pipes and applications with confined space. The LVL200 can be used to measure products with a minimum density of >0.5 g/cm³ (0.018 lbs/in³). The LVL200 can be used in difficult conditions including turbulence, air bubbles, foam generation, buildup, or strong external vibration.
SITRANS LVL200 continuously monitors faults via frequency evaluation, providing early detection of strong corrosion or damage on the tuning fork, loss of vibration, or a line break to the piezo drive.
The tuning fork is piezoelectrically energized and vibrates at its mechanical resonance frequency of approx. 1200 Hz. The vibration frequency changes when the tuning fork is covered by the medium. This change is detected by the integrated oscillator and converted into a switching command. The integrated electronics evaluate the level signal and output a switching signal, directly operating connected devices.
Key Applications: For use in liquids and slurries, for level measurement, overfill, and dry run protection.
Benefits- Proven vibrating level switch technology for liquids
- Compact insertion length of 40 mm (1.57”) for confined space applications
- Fault monitoring for corrosion, loss of vibration or line break to the piezo drive
- SIL 2 qualified for high level and dry run applications
- Hygienic process connections
Detail| Range | 40 mm to 4 m (1.5” to 13 ft) | | Process Temperature | -50 to 250 °C (-58 to 482 °F) | | Process Pressure | -1 to 64 bar g (-14.5 to 928 psi g) |
|
|
|
|
|
|
SITRANS LVS100
|
|
Mã sản phẩm:
7ML5735
Tên sản phẩm:
SITRANS LVS100
Description
SITRANS LVS100 is a vibrating point level switch for bulk solids.
SITRANS LVS100 detects high, low or demand levels of dry bulk solids in bins, silos or hoppers.
SITRANS LVS100 has a compact design and can be top, side, or angle mounted. The vibrating fork design ensures the tines are kept clean. The unique design of the fork and crystal assembly eliminates false high level readings even if tines become damaged.
A signal from the electronic circuit excites a crystal in the probe causing the fork to vibrate. If the fork is covered by material, the change in vibration is detected by the electronic circuitry which causes the relay to change state after a one second delay. When the fork is free from material pressure, full vibration resumes and the relay reverts to its normal condition.
Key Applications: dry bulk solids in bins, silos, hoppers
Benefits- High resistance to mechanical forces
- Strong resistance to external vibrations
- Rotatable enclosure for ease of installation and wiring
- Suitable for point level detection of materials starting at a bulk density of 60 g/l (3.8 lb/ft³)
- Customer desired extensions up to 2000 mm (8")
- Durable short fork option starting at 170 mm (6.7") insertion length
Detail| Range | 170 mm to 2 m (6.7” to 6.5 ft) | | Process Temperature | -40 to 150 °C (-40 to 302 °F) | | Process Pressure | Up to 10 bar g (145 psi g) |
|
|
|
|
|
|
SITRANS LVS200
|
|
Mã sản phẩm:
7ML5731/7ML5732/7ML5733/7ML5734
Tên sản phẩm:
SITRANS LVS200
Benefits
• High resistance to mechanical forces
• Strong vibration resistance to high bulk material loads
• Rotatable enclosure
• Suitable for low density material: standard version, 20 g/l
(1.3 lb/ft3); liquid/solid interface version, 50 g/l (3 lb/ft3), and
low density option min. 5 g/l (0.3 lb/ft3)
• Customer desired extensions up to 20000 mm (787")
• Optional detection of solids within liquid
• Durable short fork option with 165 mm (6.5") insertion length
Application
The standard LVS200 detects high, low or demand levels of dry
bulk solids in bins, silos or hoppers. The liquid/solid interface
version can also detect settled solids within liquids or solids
within confined spaces such as feed pipes. It is designed to ignore
liquids in order to detect the interface between a solid and
a liquid.
A pipe extension version is available with either the standard or
liquid/solid interface electronics and fork, separated by a customer
supplied 1" pipe.
SITRANS LVS200 has an optional 4 to 20 mA output for monitoring
buildup on the fork to determine when preventative maintenance
should be performed in sticky applications.
The LVS200 has a compact design and can be top, side or angle
mounted. The vibrating fork design ensures the tines are kept
clean. The unique design of the fork and crystal assembly eliminates
false high level readings even if tines become damaged.
A signal from the electronic circuit excites a crystal in the probe
causing the fork to vibrate. If the fork is covered by material, the
change in vibration is detected by the electronic circuitry which
causes the relay to change state after a one second delay. When
the fork is free from material pressure, full vibration resumes and
the relay reverts to its normal condition.
• Key Applications: dry bulk solids in bins, silos, hoppers or settled
solids within liquids (interface version)
|
|